We are now stocking 14ga. Red Iron Metal in the following configurations:
- Cee's
- Receiver's
- Square Tubing
- Base/Rake Angle
Metal Panels
Legacy Metal is your go-to Colorado metal panel supplier. We offer a variety of metal panel profiles for roofing and siding, a large selection of colors, and custom panel lengths.
We offer a 48-hour turnaround on most of our metal panels, with some having a two-week lead time.
Contact us if you would like more information on our lineup of metal panel profiles.
Tuff Rib Panels
We offer Ag metal panels in 26- and 29-gauge corrosion-resistant steel. Ag panels are preferred for agricultural, industrial, and light commercial applications. We offer a turnaround time of 48 business hours for Tuff Rib/Ag Panel orders.
- Panel width: 36″
- Rib Height: 3/4″
- Rib Features: 9″ centers
- Standard Gauges: 26 & 29
- Colors
PBR Panels
Legacy Metal Center offers high-quality 26 gauge PBR panels. PBR panels feature an extra rib in the center that gives extra rib in the center, giving additional strength and durability. We roll our panels from corrosion-resistant steel designed to withstand hard weather conditions. We offer a turnaround time of 48 business hours for PBR Panel orders
- Panel Width: 36″
- Rib Height: 1-1/4″
- Rib Features: 12″ Centers
- Standard Gauges: 26 Gauge
- Colors
Snap Lock Panels
Snap Lock is a standing seam panel used in light commercial buildings or areas with long runs that may result in thermal expansion. We roll our snap lock panels in 26-gauge steel. Clips are used to attach the panel instead of using exposed fasteners. We offer a turnaround time of 48 business hours for Snap Lock Panel orders. This is a subcategory of standing seam panels.
- Panel width: 16″
- Rib Height: 15/16″
- Standard Gauge: 26 and 24
- Colors
Hi-Rib Panels
We offer 26 gauge Hi-Rib metal panels. Hi-Rib panels feature 3 tall ribs and smaller ribs between, giving additional strength and durability. We roll our panels from corrosion-resistant steel and can make custom lengths for your structure. We offer a turnaround time of 48 business hours for Hi-Rib Tall orders
- Panel Width: 36″
- Rib Height: 1-1/2″
- Rib Features: 18″ Centers
- Standard Gauges: 26 & 24
- Colors
Board & Batt Panels
Our Board and Batten metal panels are designed to look like wooden board and batten siding. The Board and Batten metal panels have concealed fasteners and have a gap between each sheet to resemble batten. We roll our board and batten in 29, 26 or 24-gauge. We offer a turnaround time of 48 business hours for Board and Batt Panel orders
- Panel width: 12″
- Batten width: 2-1/2″
- Rib height: 3/4″
- Gauges: 29, 26 & 24
- Colors
7/8″ Corrugated Panels
We offer 26 and 29-gauge 7/8″ corrugated metal panels. We have about a 2 week lead time on corrugated panel orders. We use corrosion-resistant steel for our panels. Corrugated panels are usually used for light-duty roofing and siding applications.
- Panel width: 32″
- Rib height: 7/8″
- Rib features: 2-11/16” centers
- Gauges: 26 & 24
- Colors
2 1/4″ Corrugated Panels
We offer 29 and 26-gauge 2 1/4″ corrugated metal panels. This panel type has a lead time of about 2 weeks. As with our other corrugated panels, you can use these for both roofing and siding.
- Panel Width: 38″
- Rib Height: 1/2″
- Rib Features: 2-1/4″ centers
- Standard Gauges: 29 & 26
- Colors
Flush Soffit Panels
The Flush Soffit metal panel is typically used in commercial and architectural applications as a modern siding panel, or in traditional soffit panel applications. This panel comes in 26 or 24-gauge metal and has a turnaround time of 2 weeks.
- Panel Width: 16″
- Rib Height: 1″
- Standard Gauges: 26 & 24
- Panel Options: Flat or striations
- Colors
7.2 Panels
Rugged Rib Panels
The Rugged Rib panel is an 3’ exposed fastener panel and is very similar to a standing seam panel. This panel comes in 29 or 26-gauge metal and has a turnaround time of 2 weeks.
- Panel Width: 36″
- Rib Height: 3/4″
- Rib Features: 12″ Centers
- Standard Gauges: 29 & 26
- Colors
Lo-Pro Metal Panels
The Lo-Pro panel is great for both interior liner panel applications and exterior siding projects with a hidden lap design. We offer Lo-Pro panels in either 29 or 26-gauge metal.
- Panel Width: 36″
- Rib Height: 1/4″
- Rib Features: 4-1/2″ centers
- Standard Gauges: 29 & 26
- Colors
Metal Siding Trim
Metal siding and roofing are great for protecting your home, shop, or utility building, but you don’t want to forget the trim as well. We offer multiple metal siding trim profiles for any roofing or siding application. Metal trim keeps your building weathertight and adds an aesthetic appeal to your building.
We Offer a 48-hour turnaround time on all of our metal trim profiles.
How to Get Started
01
Use the Colorizer
We recommend using our 3D colorizer before ordering metal panels. This way, you can see how the color scheme will look on your building.
02
Request a Quote
You can give us a call or submit a quote request on our website. Add the needed panel lengths, and we will quote you for your order.
03
Delivery
Once you place the order, we will begin rolling your panels. We can deliver it to you, or if you want to pick it up, visit us at 375 Shoop Dr. Penrose, Co 81240.