Metal Roofing & Siding Panels In Santa Fe, NM

Are you searching for metal panels in Santa Fe, NM? We know how tough it can be to find a dependable and trustworthy local metal supplier. That’s why Legacy Metal is here for you. We provide our customers with high-quality metal sheets and standing seam roof panels.

They do a excellent job.

Brothers Love Carpentry recomends 10 out of 10. A great place for metal roofing, siding and trim. They do a excellent job. We use them for all of our custom homes, home additions and remodels.

Brother Grimes

Excellent customer service.

Excellent customer service. Even though my job wasn’t huge they helped answer all my questions and get me the products I needed. I would use them again 100%!

Glen Thompson

Customer first business

Wow outstanding customer service, these guys go above and beyond really appreciate there quick response definitely will be using them again they’re customer first business

Roy Maestas

Got It Done!

Abandoned by our contractor, we went to Legacy Metal with a very difficult job of trying to decipher very confusing blue prints and fill our order to finish our metal building! They stepped up to the job and got it done for us in record time!

Rhonda Thompson

Great People!

Great people. We lost a roof panel during the recent windstorms.
Legacy made us a replacement sheet within an hour, at a good price. We needed a non-standard length, not something other suppliers had. Since they form the panels right there, custom length was no problem. And they have a wide variety of colors. All the other places I checked were more expensive and it would have taken weeks to get a standard length panel. I don’t think custom-length panels were even an option.
Thanks, guys. I really appreciate you.

Emma Camp

Hard working

Hard working, Honest people

Calvin Stoltzfus

Consistent quality

Quick turn around times and Consistent quality. Definitely recommend.

Julian Garber

Enjoyed doing business with them.

They will work with you at every angle. Enjoyed doing business with them.

Deanna Stone

Great service!

Whether it’s a phone call or a visit, Julia does such a wonderful job to make ya feel welcomed and assisted as needed! Great service!

Yakon Akinin

excellence staff!!

Great store! excellence staff!!

Aaron Hofland

Topnotch!!!

These guys are topnotch! They rolled the new High rib profile metal for our new house and absolutely love it! These guys can custom bend about any trim u need and are always easy and friendly to deal with!!!!!

Marlin Yoder

Siding Metal Panels in Santa Fe

At Legacy Metal Center, we supply PBR, corrugated, AG, and Hi-Rib metal siding panels. Whether you're a home builder, shed builder, pole barn contractor, or DIY enthusiast seeking a siding metal panels in Santa Fe, we deliver superior metal pricing and quicker turnaround times.

PBR Panel Siding Supplier in Santa Fe, NM

PBR, or Purlin Bearing R panels, feature a wide overlap section designed for use with exposed fasteners. This design enhances metal-to-metal contact, creating a stronger and more weather-resistant seal. Each PBR panel measures 36 inches in width, with major ribs spaced 12 inches apart and additional minor ribs in between. Available in various colors, these panels allow you to customize your metal shed or structure.

Build In 3D!

AG Panel Siding Supplier in Santa Fe, New Mexico

ag siding metal panel in santa fe new mexico

The AG panel is the most popular type of metal siding for sheds. Our AG panels are 36 inches wide, with prominent ribs spaced 9 inches apart and smaller supporting ribs in between. These metal sheets, designed for use with exposed fasteners, are commonly used for utility structures, light commercial buildings, and farms, giving them the name "AG panel." The main ribs are 3/4 inch tall and come in a variety of colors. As your metal supplier in Santa Fe, NM, we offer top-quality AG panel sidings!

Build In 3D!

7/8″ Corrugated Siding Supplier in Santa Fe, NM

corrugated siding metal panel in santa fe new mexico

Our 7/8" corrugated metal sheet profile provides an efficient and straightforward solution for your shed. With ribs spaced 7/8" apart, these 32" wide corrugated sheets can be customized to your desired length. Offered in a variety of colors, they allow you to customize your shed to make it unique. Be sure to select dependable metal panels in Santa Fe, NM, before placing your order!

Build In 3D!

Snap Lock Siding Supplier In Santa Fe, NM

Snap Lock is a modern metal profile with a clean, simple look. The panels snap together easily and are held in place with a hidden clip system. This design gives a tidy appearance and ensures a secure seal, making Snap Lock one of the most weather-resistant metal panel systems around. Our snap-lock panels are 16 inches wide.

Build In 3D!

High-Rib Siding Supplier In Santa Fe, NM

Our High-Rib metal panels have taller ribs than AG or PBR panels. Each panel is 36 inches wide and has three ribs, with small structural ribs between them. High-rib panels need fewer fasteners than AG or PBR panels, which makes installation easier. Orders for our High-Rib panels are processed within 48 hours and are typically delivered within a week.

Build In 3D!

What Is The Difference Between Corrugated, AG Panels, and PBR Siding?

Our metal panels in Santa Fe offer a diverse range of options to suit various architectural needs. Corrugated siding, with its wavy design, excels at managing water, making it perfect for rainy climates. AG panels, or Agricultural panels, are flat and sturdy, often used on barns and storage buildings due to their durability and cost-effectiveness. PBR siding, short for Purlin Bearing Rib, includes an enhanced overlap feature that boosts leak resistance, making it ideal for regions needing superior weather protection.

Roof Metal Panels in Santa Fe, NM

If you're a roofing contractor needing reliable metal panels in Santa Fe for prompt deliveries and competitive prices on premium materials, look no further! At Legacy Metal Center, we offer top-quality metal roof panel materials for roofers in Santa Fe, New Mexico.

PBR Roofing Supplier In Santa Fe, New Mexico

pbr-siding-and-roofing-panel-supplier-in-Utah

Our PBR roofing panels are a long-lasting choice for shed roofs, built to endure over time! Like PBR siding, PBR roofing panels get their name from Purlin Bearing R panels. These panels feature a wider overlap section, providing superior weather resistance for your roof.

Build In 3D!

AG Roofing Supplier In Santa Fe, New Mexico

AG panels have traditionally been associated with agricultural buildings, which is how they got their name. Although AG panels have smaller ribs compared to PBR panels, the ribs are spaced closer together, being 9 inches apart and 3/4 inches tall. Our AG roofing panels are 36 inches wide and come in various lengths. Before making your purchase, make sure to select a dependable supplier of metal panels in Santa Fe!

Build In 3D!

7/8″ Corrugated Roofing Supplier In Sante Fe, New Mexico

Corrugated metal sheets serve as an economical and lightweight option for shed roofing panels. Our 7/8" corrugated shed roofing is manufactured through cold rolling in Santa Fe. The ribs of these sheets are 7/8" in height and 32" in width. Select from our extensive color options to build a unique shed roof.

Build In 3D!

High-Rib Roofing Supplier In Santa Fe, New Mexico

Our high-rib roofing panels have taller ribs spaced further apart compared to our Ag or PBR panels. This design uses fewer fasteners, making installation quicker and more affordable. Our high rib panels are 36 inches wide and have three ribs spaced 18 inches apart.

Build In 3D!

Snap Lock Roofing Panel Supplier In Santa Fe, New Mexico

snap lock metal roofing panel available in Santa Fe New

Snap Lock roofing is made for easy installation. It has parts that easily snap together. Our panels are 16 inches wide and are attached to the roof with hidden clips, giving the roof a modern metal look. This roofing system is designed to be both functional and visually appealing.

Build In 3D!

Shed Trim Santa Fe Metal Supplier

Enhance your project with our premium trim options! If you need trim for your metal shed, you're in the right place. Explore our range of ridge caps, side trims, and rat guard profiles to find the perfect components for building a new shed or upgrading an existing one. Customize the length and color of all our trim products to perfectly match your vision and specifications.

Where is Your Metal Supplier in Santa Fe, New Mexico

For shed sheet metal needs in Santa Fe, choose Legacy Metal Center. Our sheet metal and metal trim products are manufactured in Penrose, Colorado. We’re here to help! Contact us today for a standing seam metal roof or to learn how Legacy Metal Center can meet your metal shed siding and roofing needs.

Address: 375 Shoops Dr, Penrose, CO 81240

Phone: 719-784-1949

Hours: 6:30 AM - 4:30 PM Monday to Friday. Closed Saturday & Sunday