Whether you’re building a new home, updating a barn, or working on a commercial project, finding the right metal panels makes a difference. Legacy Metal Center offers a variety of metal roofing and siding panels for homeowners, contractors, and builders across Colorado, Utah, New Mexico, Nebraska, Kansas, and Wyoming. Choose from different styles, colors, and custom lengths to match your project. Our selection includes Tuff Rib, PBR, standing seam, Board and Batten, Corrugated, Rugged Rib, and Lo-Pro panels. We focus on providing quality materials, helpful service, and fast turnaround times on many orders to make your project easier from start to finish.
From agricultural buildings and equipment sheds to workshops and light commercial structures, Tuff Rib Panels are a popular option for practical building projects. Legacy Metal Center offers these panels in 26-gauge corrosion-resistant steel, with a 36-inch width and ¾-inch ribs spaced 9 inches apart. They’re a good fit for Colorado property owners looking for dependable metal roofing or siding materials. Most Tuff Rib and Ag Panel orders are ready within approximately 48 business hours.
When a building project calls for a panel with a more pronounced profile, PBR panels are worth considering. Their additional center rib provides added structural support compared with similar panel profiles. Legacy Metal Center supplies 26-gauge PBR panels made from corrosion-resistant steel, measuring 36 inches wide with 1¼-inch ribs spaced 12 inches apart. They’re commonly used on commercial buildings, workshops, barns, and other structures. Most orders are ready within approximately 48 business hours, helping Colorado contractors and builders stay on schedule.
A clean roofline can make a big difference in a building’s overall appearance. Our Snap Lock Standing Seam Panels for sale in Colorado provide a smooth, modern finish with concealed clips instead of exposed fasteners. This fastening system also allows for thermal movement, an important consideration for longer roof runs. Available in 24- and 26-gauge steel, these panels feature a 16-inch width and 15/16-inch ribs. They’re a great option for Colorado homes and light commercial buildings where a clean standing seam look is desired.
Not every metal building project calls for a simple panel profile. Hi-Rib Metal Panels for sale in Colorado offer a more distinctive design, with three prominent ribs and smaller ribs in between. They’re made from corrosion-resistant steel in 24- and 26-gauge options and measure 36 inches wide. The ribs stand 1½ inches high and are spaced 18 inches apart. Custom lengths are available for projects throughout Colorado and nearby states.
The area underneath a roof overhang is just as important when it comes to giving a building a finished look. Soffit Pro Panels offer a clean appearance and come in both solid and vented styles. The vented option can help improve airflow when used as part of a properly designed ventilation system. Made from 26-gauge steel, the panels are 16 inches wide, with ½-inch ribs spaced 4⅝ inches apart. They also come in precut lengths up to 12 feet, making them a practical choice for roof overhangs on Colorado homes, garages, and commercial buildings.
Love the traditional look of board and batten siding? You can get a similar appearance with metal panels instead of wood. Legacy Metal Center’s Board & Batten Panels feature a raised batten design and concealed fasteners, giving exterior walls a clean, finished look. They’re available in 29-, 26-, and 24-gauge steel, with a 12-inch panel width, 2½-inch batten width, and ¾-inch rib height. They’re especially worth considering for Colorado homes, barns, and buildings where a traditional siding style fits the design.
The familiar wavy profile of corrugated metal has been used on barns, sheds, and other buildings for generations. If you want that traditional appearance, 7/8″ Corrugated Metal Panels are a practical option for light-duty roofing and siding projects. They’re made from corrosion-resistant steel and measure 32 inches wide, with ⅞-inch ribs spaced 2 11/16 inches apart. Available in 26- and 29-gauge steel, these panels work well for projects where a classic corrugated look is preferred. Allow approximately two weeks for order turnaround.
Give your building a little more character with the classic look of 2 1/4″ Corrugated Metal Panels. Their wider corrugated pattern creates a distinctive appearance that works well on barns, cabins, sheds, and residential or agricultural buildings. These panels can be used for both roofing and siding and come in 29- and 26-gauge steel. Each panel measures 38 inches wide, with ½-inch ribs spaced 2¼ inches apart. They’re a great option for Colorado projects where you want a traditional metal finish, with an estimated two-week lead time.
Not every metal panel needs a pronounced rib pattern. Flush Soffit Panels offer a flatter, more streamlined appearance that works well in modern architectural designs and traditional soffit applications. You can choose between flat and striated styles, depending on the look you’re after. Available in 24- and 26-gauge steel, these panels are 16 inches wide with a 1-inch rib height. They’re also an option for certain exterior siding applications, making them useful for projects that call for a clean, consistent finish.
For projects where the panel design is part of the building’s overall appearance, 7.2 Metal Panels offer a distinctive profile with tall, evenly spaced ribs. Their 1½-inch rib height and 7.2-inch spacing create a bold look that works well on residential and commercial structures. Legacy Metal Center offers these panels in 22- and 24-gauge steel, with a 36-inch panel width. They’re worth considering for Colorado property owners who want a more defined metal roof or siding design.
Want something that has the appearance of standing seam without using a concealed-fastener system? Rugged Rib Metal Panels offer a similar wide, striated look while keeping the fasteners exposed. This makes them a different option for homeowners, contractors, and builders comparing metal panel styles for roofing or siding. They’re available in 29- and 26-gauge steel, with a 36-inch width, ¾-inch rib height, and 12-inch rib spacing.
Sometimes a project calls for a more subtle metal finish rather than a panel with large, noticeable ribs. Lo-Pro Metal Panels feature a low-profile ¼-inch rib and a hidden S-lock connection that keeps the panel lap out of sight. This gives interior walls and exterior siding a smooth, consistent appearance. Available in 29- and 26-gauge steel, each panel is 36 inches wide with ribs spaced 4½ inches apart. They’re a good option for Colorado workshops, garages, commercial interiors, and building exteriors where a clean finish is preferred.
A good roofing or siding project needs the right finishing details, and metal trim is an important part of the job. It helps cover exposed edges, create clean transitions, and protect vulnerable areas from moisture. At Legacy Metal Center, we offer a variety of metal trim profiles for roofing and siding applications, whether you’re working on a home, shop, barn, or commercial building. We serve customers throughout Colorado and nearby states, including Utah, New Mexico, Nebraska, Kansas, and Wyoming. With a 48-hour turnaround time on all metal trim profiles, you can get the finishing pieces you need without a long wait.
Get your metal panels, trim, and accessories delivered from our Penrose facility to your jobsite or business. We serve customers throughout Colorado and arrange deliveries nationwide, including Utah, Kansas, New Mexico, and Wyoming. Share your delivery address when requesting a quote so we can confirm transportation costs and unloading requirements.
We recommend using our 3D colorizer before ordering metal panels. This way, you can see how the color scheme will look on your building.
02
Request a Quote
You can give us a call or submit a quote request on our website. Add the needed panel lengths, and we will quote you for your order.
03
Delivery
Once you place the order, we will begin rolling your panels. We can deliver it to you, or if you want to pick it up, visit us at 375 Shoop Dr. Penrose, Co 81240.
Yes. We roll metal panels to order at our Penrose, Colorado, facility, including custom lengths. Include your required measurements when requesting a quote so we can review the order.
How Long Does It Take to Get Metal Panels in Colorado?
At Legacy Metal Center, many of our metal panel profiles are ready within 48 business hours, while others have an estimated turnaround time of about two weeks. Lead times vary depending on the panel style and order details. If you’re planning a roofing or siding project in Colorado, Utah, New Mexico, Nebraska, Kansas, or Wyoming, contact our team to confirm the current turnaround time before scheduling your installation.
Do you deliver metal panels outside Colorado?
Yes. We deliver throughout Colorado and nationwide. Send us your delivery address to confirm pricing and unloading arrangements for your location.
Yes. You can collect your order at 375 Shoop Dr., Penrose, CO 81240. Contact us before visiting to confirm that your panels are ready.
Does Legacy Metal Center Sell Standing Seam Panels in Colorado and Nearby States?
Yes! Legacy Metal Center offers Snap Lock Standing Seam Panels for residential and light commercial projects. These panels feature concealed clips instead of exposed fasteners, creating a clean, modern roofline while allowing for thermal movement.
Where Can I Buy Board and Batten Metal Siding in Colorado?
You can buy Board and Batten metal siding directly from Legacy Metal Center. We offer Board and Batten Panels in 29-, 26-, and 24-gauge steel, featuring concealed fasteners and a design that gives buildings the classic look of traditional board-and-batten siding. We serve homeowners, contractors, and builders throughout Colorado, Utah, New Mexico, Nebraska, Kansas, and Wyoming. Contact our team to discuss your project and available panel options.
Does Legacy Metal Center Offer Metal Roofing Trim and Accessories in Colorado?
Yes! Legacy Metal Center offers a variety of metal roofing trim profiles and accessories to help complete your roofing project. Our trim options provide a clean, finished appearance while helping cover exposed edges and protect important areas of your roof. Whether you’re working on a home, barn, shop, or commercial building, we serve customers throughout Colorado, Utah, New Mexico, Nebraska, Kansas, and Wyoming.
Can I Pick Up My Metal Panel Order in Colorado?
Yes. You can collect your order at 375 Shoop Dr, Penrose, CO 81240. Contact us before visiting to confirm that your panels are ready.
Third Party Cookies
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
